Huawei eKitEngine AP266 – AX3000 Dual-Band Five-Port Wi-Fi 6 Indoor Wall Plate Access Point

Description Huawei eKitEngine AP266 is an indoor slim wall plate access point (AP) in compliance with the Wi-Fi 6 (802.11ax) standard. It can simultaneously provide services on the 2.4 GHz (2×2 MIMO) and 5 GHz (2×2 MIMO) frequency bands with four spatial streams, delivering a data rate of up to 2.975 Gbps. The AP provides one GE uplink port and four GE downlink ports (one supporting PoE OUT). It can be installed on a desk, wall, ceiling, or junction box, meeting connection requirements in multiple scenarios. The AP is small and easy to deploy, ideal for indoor coverage scenarios such as budget hotels, hospitals, commercial stores, and schools. Product Information Model: AP266(11ax indoor,2 2 dual bands,smart antenna,PSE) Part Number: 50087274 Ports GE0/PoE_IN (RJ45): Ethernet electrical port that supports 10M/100M/1000M auto-sensing, connects to the uplink wired Ethernet, and supports PoE input. GE1 to GE3 (RJ45): Ethernet electrical ports that support 10M/100M/1000M auto-sensing and connect to the downlink wired Ethernet. GE4/PoE_OUT (RJ45): Ethernet electrical port that supports 10M/100M/1000M auto-sensing, connects to the downlink wired Ethernet, and supports PoE output. Technical Specifications Dimensions (H x W x D): 160 mm × 86 mm × 38 mm (without packaging) / 187 mm × 108 mm × 68 mm (with packaging) Weight: 0.23 kg (without packaging) / 0.42 kg (with packaging) Installation Type: Desk Wall Ceiling (Gypsum Board) Junction Box (86 mm / 1-Gang 120 mm / Octagonal) Storage: NAND Flash 256 MB Console Port: None Maximum Power Consumption: 9.4 W (excluding PoE out) Maximum Heat Dissipation: 32.07 BTU/hour Power Supply Mode: PoE Rated Input Voltage: NA Input Voltage Range: PoE: 802.3at/af Service Port Surge Protection: PoE Ports: Differential mode (48 V-RTN): 0.5 kV (1.2/50 μs, 42 Ω), criterion B Common mode (8 wires to ground): 4 kV (1.2/50 μs, 42 Ω), criterion B Non-PoE Ports: Common mode (8 wires to ground): 4 kV (1.2/50 μs, 42 Ω), criterion B PoE OUT: Supported Maximum PoE Output Power: 15 W Maximum Number Of Physical Ports On The Entire Device: GE (RJ45) × 5, 10M/100M/1000M auto-sensing Long-Term Operating Temperature [°C(°F)]: 0°C to 40°C (32°F to 104°F). From 1800 m to 5000 m (5905.51 ft. to 16404.20 ft.), the maximum ambient temperature decreases by 1°C (1.8°F) for every 300 m (984.25 ft.) increase in altitude. Storage Temperature [°C(°F)]: –40°C to 70°C (–40°F to 158°F) Long-Term Operating Relative Humidity [RH]: 5% RH to 95% RH, non-condensing Long-Term Operating Altitude [m(ft.)]: –60 m to 5000 m (–196.85 ft to 16404.20 ft) Atmospheric Pressure [kPa]: 53 kPa – 106 kPa ETSI 300 019-2-3 Ground: Floating ground USB: Not supported IoT Slot: Not supported BLE: Not supported Radio Number: 2 Operating Frequency Band: 2.4 GHz, 5 GHz MIMO Spatial Streams: Radio 0 (2.4 GHz): 2×2 Radio 1 (5 GHz): 2×2 Wi-Fi Standard: 2.4 GHz: 802.11b/g/n/ax 5 GHz: 802.11a/n/ac/ac Wave 2/ax Radio Interface: Built-in smart antennas Antenna Gain: 2.4 GHz: 4 dBi/chain (peak value), 2 dBi combined gain 5 GHz: 4 dBi/chain (peak value), 1 dBi combined gain Maximum Transmit Power: 2.4 GHz: 20 dBm/chain, 23 dBm combined power 5 GHz: 20 dBm/chain, 23 dBm combined power Single Radio Transmit Power [dBm]: 2.4 GHz: –10 dBm to 20 dBm/chain 5 GHz: –10 dBm to 20 dBm/chain MTBF [year]: 235.46 year MTTR [hour]: 2 hour Frequency Stability [ppm]: ±20 802.3bt Power Supply Description: The power supply mode is negotiated to 802.3at, and no function is restricted. 802.3at Power Supply Description: The power supply mode is negotiated to 802.3at, and no function is restricted. 802.3af Power Supply Description: The power supply mode is negotiated to 802.3af, and the PSE out function is unavailable. DC Power Supply Description: Not supported.